1/4" Drive Pins Categories Mechanical Anchoring High Load Anchors Blue-Tip 2 SCREW-BOLT™ Hangermate™ Threaded Rod Hangers Blue -Tip SCREW-BOLT™ Drop-In / Wedge Anchors Tapper+™ Concrete Screws Cast In Place Anchors (CIP) EZY Reach Hollow Core Anchors Tie Down Anchors Suspension Anchors Sleeve anchors Nylon Anchoring / Plugs Vertigo™ Threaded Rod Hangers WALL-DOG™ / Universal Anchors Light Duty / Cavity Anchors Light Duty / Plastic Plug Anchors Nylon Nail-In Anchors Masonry Nails Packers - Shims Adhesive Anchoring Injection Systems Capsules Expanding Foams & Sealant Dispensing Guns Flat Cut Studs Chisel Point Studs Cleaning / Installation Equipment Internally Threaded Sleeves Sieves Forced Entry Powder Actuated Fastening Tools Powder Actuated Pins and Charges Powder Actuated Accessories Trak-It® Gas Operated Fastening Tools Trak-It® Gas Operated Pins and Fuel Cells Trak-It® Gas Operated Accessories Screw Solutions ONE-SHOT® Polycarbonate Roofing Screws Power Tool Accessories Concrete Grinding Cups Diamond Blades 1/4" Drive Pins 1/4" Head drive pins for direct fastening into steel and concrete. Features Suitable for use in most High Velocity Powder Actuated tools. Tags: Forced-Entry , Powder-Actuated , Drive-Pins , DP Series Part No. Description Length (mm) Head Diameter (inch) Pin Diameter (mm) Box Qty Carton Qty DP625-PWR Drive Pin 3.7mm x 25mm (1/4" Head) 25 1/4" 3.7 100 1000 DP640-PWR Drive Pin 3.7mm x 40mm (1/4" Head) 40 1/4" 3.7 100 1000 DP650-PWR Drive Pin 3.7mm x 50mm (1/4" Head) 50 1/4" 3.7 100 1000 DP665-PWR Drive Pin 3.7mm x 65mm (1/4" Head) 65 1/4" 3.7 100 1000 DP675-PWR Drive Pin 3.7mm x 75mm (1/4" Head) 75 1/4" 3.7 100 1000 Currently viewing / Home / Products / Forced Entry / Powder Actuated Pins and Charges / 1/4" Drive Pins