8mm Drive Pin With Top Hat Categories Mechanical Anchoring High Load Anchors Blue-Tip 2 SCREW-BOLT™ Hangermate™ Threaded Rod Hangers Blue -Tip SCREW-BOLT™ Drop-In / Wedge Anchors Tapper+™ Concrete Screws Cast In Place Anchors (CIP) EZY Reach Hollow Core Anchors Tie Down Anchors Suspension Anchors Sleeve anchors Nylon Anchoring / Plugs Vertigo™ Threaded Rod Hangers WALL-DOG™ / Universal Anchors Light Duty / Cavity Anchors Light Duty / Plastic Plug Anchors Nylon Nail-In Anchors Masonry Nails Packers - Shims Adhesive Anchoring Injection Systems Capsules Expanding Foams & Sealant Dispensing Guns Flat Cut Studs Chisel Point Studs Cleaning / Installation Equipment Internally Threaded Sleeves Sieves Forced Entry Powder Actuated Fastening Tools Powder Actuated Pins and Charges Powder Actuated Accessories Trak-It® Gas Operated Fastening Tools Trak-It® Gas Operated Pins and Fuel Cells Trak-It® Gas Operated Accessories Screw Solutions ONE-SHOT® Polycarbonate Roofing Screws Power Tool Accessories Concrete Grinding Cups Diamond Blades 8mm Drive Pin With Top Hat 8mm Head Drive Pins with Top Hat for shooting into steel and concrete. Features For use with Powers PA3500EX and P3X Powder Actuated tools Suitable for use with most other brand low velocity Powder actuated tools Tags: Forced-Entry , Powder-Actuated , Drive-Pins , Top Hat Part No. Description Length (mm) Pin Diameter (mm) Head Diameter (mm) Box Qty Carton Qty 50138-PWR Drive Pin 3.7mm x 16mm With Top Hat (8mm Head) 16 3.7 8 100 5000 50140-PWR Drive Pin 3.7mm x 19mm With Top Hat (8mm Head) 19 3.7 8 100 5000 Currently viewing / Home / Products / Forced Entry / Powder Actuated Accessories / 8mm Drive Pin With Top Hat